Close

Adjustable Joist Support AJH45G (AUS/NZ)

Suits 45mm wide Joists (Australia/New Zealand)
Box of 24
$123.20 incl GST
:
Small Box of 8
$66.00 incl GST
:

Freight costs apply for orders under certain dollar value. For further information please go to Shipping Information tab on the Online Store home page.

For New Zealand enquiries please contact One Stop Decking Shop P 64 (0)384 8365 E sales@onestopdeckshop.co.nz

---------------------------------------------------------------------------------------------------

Adjustable Joist Support (AJH45G) Information

As many houses these days are built on concrete slabs, there is often a shortage of height available to build a regular decking substructure of stumps, bearers and joists etc. Indeed, many houses have a slab for a patio area set down only approx 100mm below the height of the main housing slab. Fixing timber battens directly to concrete slabs is regarded as a poor building practice due the moisture uptake into the batten which will rot out the batten way before its normal lifespan. This scenario has made it very difficult for people to enjoy the relaxed lifestyle of having a timber deck at their doorstep.

The clever people from KlevaKlip have released the Adjustable Joist Support . This product, the only one of its type on the market, not only lifts the joists off the concrete, but allows you to adjust the "top of joist height" from 86mm (using 60mm length bolts + 70 x 45mm joists) to 170mm (using 120mm length bolts + 90 x 45mm joists).  

The KlevaKlip Adjustable Joist Support is registered for Patent approval. It is simple to install (installation instructions can be found at www.klevaklip.com.au/Joist-Supports-Installation-info) and can be used with suitably treated timber joists with a width of 45mm, and minimum height of 70mm.
Note: Hardwood joists should be screwed to the joist hanger rather than nailed.

Please note: - the Adjustable Joist Supports come in standard boxes of 24 units - each unit being a Joist Support + a Base Plate. Bolts, nuts, washers and dynabolts are standard sizes and must be purchased separately from your hardware store