Multi Purpose Support "Kit" MPS

Provides a bottom of Bearer/Joist from 90 mm-150 mm off ground
Box of 8
$145.20 incl GST

Freight costs apply for all orders. For further information please go to Shipping Information tab on the Online Store home page.


The KlevaKlip Multi purpose support (MPS) has been designed as a mid-sized support to cater for the “gap” in the market for decks that are a bit too high for our “Adjustable joist support” and a bit too low for our “Adjustable bearer support”.

The Multi Purpose Support has excellent adjustability, along with the strength and versatility to be used with either bearer/joist combinations, or with joists on their own. Coming in a “kit” form, it is efficiently packaged and quick and easy to assemble. All parts are fully hot dip galvanised.

The MPS can be used either with a bearer/joist combination (conventional deck building), or with just larger sized joists (eg 90, 140 or 190mm) when space or practicality does not permit a standard bearer/joist combination.

Span requirements (should be taken in conjunction with your timber span tables as timber spans are often your limiting factor):

- For 2.5 kPa rated decks, you must have a minimum of one MPS per every 1.8 square metres spread evenly across your deck.

- For 4.0 kPa rated decks, you must have a minimum of one MPS per every 1.35 square metres spread evenly across your deck.

See KlevaKlip website for more complete span information and diagrams

Important note: To achieve MPS load ratings, it is essential that the MPS is fixed at both fixing points on the base bracket.

Height Levels:

Minimum height with locking nut – 100 mm

Minimum height without locking nut – 90 mm

Maximum design height – 150 mm

360° view Multi-Purpose Support Kit Assembled